Projects
About Us
Atreydes Engineering supplies carports for parking lots. These structures are designed and calculated to comply with the Technical Building Code (CTE), the Structural Code (CE) and the Seismic Resistant Construction Standard NCSE-02, a necessary condition for the building permit.
Structure takes into account wind loads, snow, seismic actions and overloads throughout the Spanish national territory. Since its calculation is based on the CTE, it can be quickly extrapolated to fulfill the Eurocodes for its installation in the European countries adhered to these standards.
Carports of Atreydes Engineering are composed of lightweight elements that can be assembled by operators without the need for heavy lifting machines and they do not require braces to prevent the structure from tilting during assembly.
Its design, in open galvanized steel profiles, allows it to be the most economical on the market that fulfills the load requirements of the current structural regulations.
Configurations
Atreydes Engineering offers 4 configurations to suit the shape of the installation site.
Loads
Carports of Atreydes Engineering have been dimensioned for the whole national territory for average wind speeds of 26, 27 and 29m/s according to the Technical Building Code (CTE) in urban areas. Accepts up to 29m/s in conformity with Eurocode for the European territory.
Atreydes Engineering designs its carports for a snow load of 0.6kN/m². Since the snow load depends on the site height with respect to sea level, locations exceeding this load should be consulted for modification, in the case. This snow load can be extrapolated to European countries whose building regulations are subject to the Eurocodes.
Carports of Atreydes Engineering are designed against the highest basic acceleration of 0.23m/s that occurs in the national territory (province of Granada) according to the Seismic Resistant Construction Regulation NCSE-02, so that they can be installed without modifications in any location in Spain.
